Table of Contents
Advertisement
Quick Links
WINCHESTER COFFEE TABLE
HDC#:
MFG#:FTM70567
Please read over this instruction manual as it will save time in the assembly of
this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft flat
surface to avoid any damages to the product's finish.
page 1-8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection WINCHESTER FTM70567
Summary of Contents for Home Decorators Collection WINCHESTER FTM70567
- Page 1 WINCHESTER COFFEE TABLE HDC#: MFG#:FTM70567 Please read over this instruction manual as it will save time in the assembly of this product. Note: Prior to assembly, please open and lay parts out on a clean, soft flat surface to avoid any damages to the product’s finish. page 1-8...
- Page 2 Caution: The Winchester coffee table was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is not intended for inclement /severe weather in any form including, but not limited to: rain, hail, sleet, snow and/or wind.
- Page 3 DO NOT RETURN TO RETAILER IF YOU HAVE ANY QUESTIONS OR CONCERNS PLEASE VISIT OUR WEBSITE AT: www.homedecorators.com OR TOLL FREE AT: 1-800-245-2217 MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30 AM TO 8:00PM EASTERN STANDARD TIME Warranty Coverage Requirements: 1.
- Page 4 Parts Check List Please remove all parts carefully from box and lay out on clean, soft surface to protect product’s finish. ① ② Table Leg – 2 PCS Table Top – 1PC ③ Leg Connector– 1 PC page 4-8...
- Page 5 A. M6X15 Bolt – 10+1 PCS B. M6 Washer – 10+1 PCS C. Hex Wrench – 1 PC page 5-8...
- Page 6 Lay the table top (1) upside down on a soft surface. Attach the table legs (2) to the table top (1) using M6x15 bolts (A) and M6 washers (B). Use the hex wrench (C) to loosely tighten all the bolts. Repeat this step for the other table legs.
- Page 7 Attach the leg connector (3) to the table legs (2) using M6x15 bolts (A) and M6 washers (B). Use the hex wrench (C) to loosely tighten all the bolts. Do not fully tighten all the bolts! page 7-8...
- Page 8 Once all the bolts are in place. Fully tighten all the bolts with the hex wrench (C). Turn the table right side up. Check to ensure the table is tightly assembled and stable before use. page 8-8...
Need help?
Do you have a question about the WINCHESTER FTM70567 and is the answer not in the manual?
Questions and answers