Table of Contents
Advertisement
7
Status Description ：
When software appears below warning message:
It means the power supplied by USB port is not enough.
Click "Cancel" can ignore that, but it may cause following
procedure wrong.
Troubleshooting ：
1. Use standard Y-USB cable and connected to the computer's two
USB port.
2. Change another USB port.
3. Connect the programmer and computer through USB Hub, besides
the USB Hub must be powered by external power supplier.
(5V/1A above)
8
Status Description ：
Self-test function (Self-Test) can not pass all the test.
Troubleshooting ：
Please check whether there is any IC or adapter on programmer's
socket. If it still failed, please send the programmer and
self-test messages' file back to us.
Universal IC Writer User's Manual
29
Advertisement
Table of Contents
