Table of Contents
Advertisement
Universal IC Writer User's Manual
6.Back to the main menu, check the lower left
button at "Procedure"
column. Then checking other procedures according to your needs.
7.Finally confirming the IC is placed steadily again and checking the serial number.
After "Check Sum" procedure is correct, then clicking
button. The
programmer will process the IC based on your selection.
Note: In the process of implementing the IC. Never unplugging USB cable or
touching socket components by hands. Switching open socket's stick is also
prohibited.
Upon completing all the process, the result will be displayed by "PASS/FAIL".
If some problems occur in the process, the system will stop. Then error parts will
change into red.
Supposing the errors are placement or ID checking of the IC, it will display in
message column. You can repeat the procedure after solving the problem.
22
Advertisement
Table of Contents
