Chapter 5 Simple Operating Practice - LEAP Electronics LEAPER-56 User Manual

Chapter 5 Simple Operating Practice

e.g.1.Programming the MCU from data of computer, and adding protection on IC.
1.Click
Then input searching keywords "AT89C51", the "Manufacturer" column will list possible
companies. If there are over one manufacturer listing, you can select from that. On the top
left side,"Parts Number" column lists the serial number of the IC. You can click what you
need and check related messages and precautions. Finally press
selecting. 。
2. After the system settings are finished. Sometimes it will appear message window
according to the characteristics of the IC. Remind you that the selected IC's additional
information blocks or parameters settings need be reload or set. When you change the
new IC serial number, all the parameters automatically return to default. That is to say,
if you want to program the MCU data to another different serial number MCU.(Including
same serial number, but different package)You have to check other additional data blocks
and reset the device parameters.
Universal IC Writer User's Manual
button on the top left to enter "Device Select" page.
19
to finish