GE 14 Owner's Manual page 17

Connect the Tubing to the Refrigerator
Before making the connection to the
refrigerator, be sure the refrigerator power cord
is not plugged into the wall outlet.
We recommend installing a water filter if your
water supply has sand or particles that could clog
the screen of the refrigerator's water valve.
Install it in the water line near the refrigerator.
Remove the plastic flexible cap from the
water valve.
Place the compression nut and ferrule
(sleeve) onto the end of the tubing as shown.
Insert the end of the copper tubing into the
water valve connection as far as possible.
While holding the tubing, tighten the fitting.
Fasten the copper tubing into the clamp
provided to hold it in a vertical position.
You may need to pry open the clamp.
17