GE 14 Owner's Manual page 13

Behind the Refrigerator
Be careful when moving the refrigerator
away from the wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those with
embossed surfaces.
Turn the leveling legs at each front
corner of the refrigerator counter-
clockwise until the rollers support the
refrigerator. Pull the refrigerator straight
out and return it to position by pushing it
straight in. Moving the refrigerator in a
side direction may result in damage to
the floor covering or refrigerator.
Light Bulb Replacement
To replace a burned-out bulb, unplug
the refrigerator from its electrical outlet,
unscrew the bulb when cool and replace
it with an appliance bulb of the same or
lower wattage.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the temperature control dial to the OFF
position, and clean the interior with a
baking soda solution of one tablespoon
(15 ml) of baking soda to one quart (1 l)
of water. Leave the doors open.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
When pushing the refrigerator back, make sure
you don't roll over the power cord or icemaker
supply line (on some models).
En poussant le réfrigérateur en place, veiller à ne
pas le faire rouler sur le cordon d'alimentation ou
la canalisation d'eau de la machine à glaçons
(sur certains modèles).
After rolling the refrigerator back into
place, turn the legs clockwise until the
legs again bear the weight of the
refrigerator.
Turning the control to the OFF position does not
remove power to the light circuit.
Move the icemaker feeler arm to the
STOP (up) position and shut off the water
supply to the refrigerator.
If the temperature can drop below
freezing, have a qualified servicer drain
the water supply system (on some
models) to prevent serious property
damage due to flooding.
Be sure the refrigerator stays in an upright
position during moving.
13