First Aid - Eastwood TIG 200 Assembly And Operating Instructions Manual

SAFETY INFORMATION
• Electric welding heats metal and tools to temperatures that will cause severe burns!
• Use protective, heat resistant gloves and clothing when using Eastwood or any other welding equipment. Never touch welded work
surface, TIG Torch or nozzle until they have completely cooled.
• Grinding and sanding will eject metal chips, dust, debris, and sparks at high velocity. To prevent eye injury wear approved safety glasses.
• Wear an OSHA-approved respirator when grinding or sanding.
• Read all manuals included with specific grinders, sanders or other power tools used before and after the welding process. Be aware of
all power tool safety warnings.
• If exposed to excessive fumes move to an area with fresh air. Follow safety information on wire manufacturer's Safety Data Sheet.
• For other injuries follow basic first aid techniques and call physician or emergency medical personnel.
CONNECTING THE WELDER TO A POWER SOURCE
The Eastwood TIG 200 AC/DC Welder requires a dedicated 240 VAC, 50 AMP, circuit breaker protected outlet. The plug installed on the Welder is a NEMA 6-50P
and should be used with a NEMA 6-50R receptacle.
As an alternative, by using the included Adapter Cord, the TIG 200 AC/DC can be used with a 120 VAC, 20 AMP, 60HZ grounded NEMA 5-15R outlet protected by
a circuit breaker.
If using an extension cord, we recommend using our Welder Extension Cords for optimal performance: Eastwood items #31739, #20029, and #20285.
To order parts and supplies: 800.343.9353 >> eastwood.com
HOT METAL AND TOOLS WILL BURN!!
FLYING METAL CHIPS CAN CAUSE INJURY!

FIRST AID

7