V.ORLANDI Rp10 Installation, Operating And Maintenance Instructions For The Installer And The User page 26

6 ASSEMBLY OF THE OPERATING HANDLE EXTENSION
This chapter refers to the figure on page 26/36.
Read the following instructions carefully before starting any operation:
Wear safety gloves!
Disassemble the operating handle by removing the three M8 bolts (21b 21c);
1)
Position the operating handle extension (21a) in so that it fits under the
2)
operating handle and tighten it back up with the three M8 bolts, at a 25 30
Nm torque wrench setting.
FIFTH WHEEL Rp10
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
21b
21c
21a
19c
PAG.
26/36
CHAP . 6
REV. 00