ARECast Quick Installation Guide Specifications ARECast Wireless Projection Button HDMI: Audio/Video data capture Interface USB: Pairing/Touch control/Power supply HDMI capture resolution Up to 4K/60p Output resolution 1920 x 1080 30p Audio sample rate 48KHz Press once to start/stop projection Button Wireless transmission protocol IEEE 802.11ac (2.4/5GHz)
Page 3
Before the Set-up: 1. Refer to the Configuration Diagram. Connect AREC Media Station to the LAN port of a router and find out the station’s IP address. For example, you can see it on the bottom-right part of the GUI (by default the GUI is available via HDMI output).
Page 4
ARECast Quick Installation Guide 3. Press [ Pair ] button to get into paring mode. 4. Connect the USB cable of ARECast to your computer for pairing. Dongle Configurator IP : 192.168.0.1 SSID : AREC Password : Pair After pressing [ Pair ], please plug the USB cable of the transmitter to the laptop.
Need help?
Do you have a question about the ARECast and is the answer not in the manual?
Questions and answers