GE DBL333 Owner's Manual page 19

Reversing the Dryer Door Swing
Open the dryer door. Remove the 4 hinge hole
1
plugs or screws from the left side of door
opening. Place nearby for future installation.
NOTE: You may need a plastic knife to help pull out
the plugs. Be careful not to scratch the paint.
Remove the four screws that secure the door
2
hinges to the dryer front panel. NOTE: Remove 1
screw from each of the 2 hinges first. Hold the door
firmly before removing the last 2 screws.
Rotate the door 180° and reinstall the door
3
hinges to the dryer front panel with the 4 screws.
Install the 4 hinge hole plugs or screws that were
4
removed in step 1 into the open screw holes on
the right side of the door opening.
19