System Reset - Sangean DPR-25+ User Manual

System reset

If your radio fails to operate correctly, or some digits on the display
are missing or incomplete, carry out the following procedures.
1. Switch on your radio.
2. Press and hold in the Advanced info button until "Manual tune"
appears on the display.
3. Rotate the Tuning control until the display shows "Factory reset".
4. Press in and release the Tuning control, the display will show
"Press SELECT to confirm reset...".
5. Press the Tuning control to confirm. A full reset will be performs and
all presets and station lists will be erased. A quick scan of DAB
band frequencies will be carried out.
In case of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required) to resume
normal operation.
19