Page 5
Attach door stopper (R) to part (1) using screw (A) with screwdriver. Insert cam bolt (D) to part (1). Insert wooden dowel (B) to part (2,14). Insert cam bolt (D) to part (10). Insert wooden dowel (B) to part (3,4).
Page 6
Insert cam bolt (D) to part (6,7,8,9). Insert wooden dowel (B) into part (6,7,8,9). Attach part (14) to part (2) with screw (T) with screwdriver. Attach foot part (15) to part (2) using bolt (H) with hex key (S).
Page 7
Attach part (10) to part (4), then insert and secure cam lock (C) to part (4) to lock it. Attach part (8,9) to part (3), then insert and secure cam lock (C) to part (3) to lock it.
Page 8
Attach part (6,7) to part (3), then insert and secure cam lock (C) to part (3) to lock it. Attach part (4) to part (2) using bolt (H) with hex key (S).
Page 9
Attach part (3) to part (2), then insert and secure cam lock (C) to part (2) to lock it. Slide back panel (11) into grooves as per diagram.
Page 10
Attach part (1) to part (3,4) then insert and secure cam lock (C) to part (3,4) to lock it. Attach plastic wedge (F) to part (11) using screw (G) with screwdriver.
Page 11
Place sticker (E) over holes as per diagram. Insert shelf support pin (J) into side panel (3,4), then place shelf (12,13) on top of support pin (J).
Page 12
Attach hinge (Q) to part (5) using screw (K) with screwdriver. Attach door plate (P) using screw (K), handle (N) using bolt (M) to part (5) with screwdriver.
Page 13
Attach part (5) to part (6) to secure hinge (Q) using screw (K) with screwdriver.