Use Your Headphones; Connect The Headphones To Your Bluetooth Device; Wired Connection; Multi-Point Connection - Philips 8000 Series User Manual

4 Use your
headphones
Connect the headphones
to your Bluetooth device
1
Turn on your mobile phone/
Bluetooth device.
2
Press and hold the on/o button to
turn the headphones on.
The white LED will turn on in
2 seconds
The headphones are reconnected
to the last connected mobile
phone/Bluetooth device
automatically
Tip
 If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Note
 If the headphones fail to connect to last
connected Bluetooth device within range in
5 minutes, it will change to connectable
mode, then will switch o automatically if it's
still not connected to any Bluetooth device
5 minutes later.

Wired connection

You can also use the headphones with
the audio cable provided. Connect the
supplied audio cable to the
headphones and external audio device.

Multi-point connection

Pairing
• Pairing the headphones to two
devices, e.g. mobile phone and
notebook
Switch between devices
• Music can only be played from one
device at a time. Your second device
will be reserved for phone calls
• Pause the audio from one device to
start playing audio from your other
device
Note
• Receiving a call on device two will pause
playback on device one. The call will be
routed automatically to your headphones.
• Ending the call will resume playback from
device one automatically.