Makita BO5040 Instruction Manual page 7

Then press the upper part of the front ixing cardboard
in arrow direction to hook it onto the claws.
1 . Notch 2. Guide
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool.
Installing paper ilter bag
1 . Holding tab
Make sure that the logo on the cardboard lip and the
logo on the dust box are on the same side, then install
the paper ilter bag by itting the cardbord lip in the
groove of each holding tab.
2
1
1
1 . Dust box 2. Dust nozzle
Make sure that the logo on the cardboard lip and the
logo on the dust nozzle are on the same side, then
install the dust nozzle on the dust box.
Removing dust box and paper
ilter bag
1
1 . Latch 2. Dust nozzle
Remove the dust nozzle by pushing the two latches.
Remove the paper ilter bag irst by pinching the logo
side of its cardboard lip, then by pulling the cardboard
lip downwards to move it out of the holding tab of the
dust box.
7 ENGLISH
1
2
2