Table of Contents
Advertisement
7.4.
Bumping correction
In case of a selected bumping bend a general correction for a bumping bend can be entered.
This function can be activated when the cursor is on the parameter for angle correction ('corr.
α
α
1/
2'). It is only available if a product is loaded that contains a bumping bend.
With Bumping Corr. a new window appears in which the correction can be entered.
When the general correction of an angle is altered, all individual corrections are recalculated.
When any of the individual corrections is altered, the general correction is recalculated.
α
α
Bumping corrections can be programmed independently for both sides,
1 and
2.
α
α
When the general correction
1 is changed, it is automatically copied to
2 and as a result, all
α
α
separate corrections for
2 are recalculated. To change correction values of
2, use
α
α
correction
2 or one of the separate corrections of
2.
V0913, 7.15
- Quick Links:
- Table of Contents
- Control Codes
Hide quick links:
Advertisement
Table of Contents
