Efeective
thread
length:
12 mm
Flat
washer
Spring
washer
Remove and discard
the packing material.
4. The mounting base is fitted with a snap holder, which may be used to hang the cover
after removal. Use the hole next to screw hole inside the cover to hang it.
a)
Unfasten the snap assy. with the string attached at the holder in the mounting base.
b)
Unwind the string.
c)
Attach the snap to a screw hole on the inside of the cover.
Note: Do not hang any other objects with the snap.
1-22
Transceiver
module
Antenna base
assy.
Platform
Hex bolt
(M10 x 25
or M10 x 20)
How to fasten the base to platform
Antenna unit, inside view
5 mm or under : M10x20
5-10mm:
M10x25
over 10 mm:
local supplied bolts
Apply silicone sealant.
Snap holder