GE Cync CFIXCNLR4S1 Installation Manual page 7

Mark the Location on the Ceiling
7
& Cut the Hole
STEP 2
Determine the position of
your downlight:
• Maximum distance from
junction box to the
downlight is 16 inches.
• Location must be within
range of 2.4GHz Wi-Fi to
enable smart control.
Once determined, use the
hole template to trace the
hole size. Cut the hole using
a drywall or hole saw.
4" wafer requires a 4-1/4
inch hole
6" wafer requires a 6-1/4
inch hole