Other Functions; Entering Ship's Position Manually - Furuno RP-180 Operator's Manual

OTHER FUNCTIONS

9.
9.1

Entering Ship's Position Manually

Ship's speed is normally input by the navigator connected to the radar. If the navigator fails
enter ship's position manually as follows:
1. Press the [MENU] key.
2. Press the [1] key twice to show the Video Plot/AIS menu.
3. Press the [0] key twice to choose AIS/Miscellaneous1.
4. Press the [7] key twice to choose Miscellaneous2.
5. Press the [3] key to choose Own Ship Pos.
6. Key in latitude position of ship. (Use the [-] key to switch latitude coordinate from North
to South; [+] from South to North.)
7. Press the [ENTER/SELECT] key.
8. Key in longitude position of ship. (Use the [-] to switch latitude coordinate from East to
West; [+] from West to East.)
9. Press the [ENTER/SELECT] key.
10. Press the [2] key to choose Manual.
11. Press the [ENTER/SELECT] key to register your selection.
12. Press the [MENU] key to finish.
MIscellaneous2
1.
2. Pos. Sensor
Navaid Manual
3. Own Ship Pos.
°
00 00.000'N
000 ° 00.000'E
4. Display All Card Data
5. Delete Data
6. All Delete
N, E; + S, W: -
Miscellaneous2 menu
9-1