Furuno LH-3000 Operator's Manual page 8

1. INSTALLATION
Flush mounting
Requires flush mount kit LH-3020 (Code No. 000-149-112). See the flush mount outline
drawing for details.
Name
Flush Mounting Plate
Screw
Wing Screw
Wing Nut
1. Make a cutout in the mounting location referring to flush mount outline drawing.
2. Place the Loud Hailer in the cutout.
3. Fix the two flush mounting plates to the Loud Hailer with screws.
4. Screw the wing nuts on the wing screws.
5. Fix the Loud Hailer with the wing bolts and then tighten the wing nuts.
2
Contents of flush mount kit
Type
TZ7300012A
6X12 SUS304
M4X35 SUS304
M4 SUS304
Loud hailer, flush mount
Code No. Qty
999-999-025
999-999-027
999-999-027
999-999-028
2
2
4
4