Huawei R100020G1 User Manual page 25

R100020G1 Charging Module
User Manual
●
Figure 2-7 Output connector (DY98-01Z03, output connector with welded board
on signal pins)
Figure 2-8 Output connector (DY98-01Z02, output connector with crimped cables
on signal pins)
Table 2-12 Output connector definition
Pin
1, 2
3, 4
5
6
7
8
9
10
11
12
Issue 05 (2021-11-16)
Output connector with crimped cables on signal pins: The connector model is
Huafeng DY98-01Z02. Crimp the communications cable (prepared by the
customer), connect the cable to the metal jack, and then insert the cable into
the corresponding pin of the output connector.
Item
1000 V DC–
1000 V DC+
CANBH
CANBL
CANBH
CANBL
CAN_GND
LINK_CHECK_OK
URGENT_TURN_OFF+
URGENT_TURN_OFF–
Copyright © Huawei Digital Power Technologies Co., Ltd.
Function
Negative output (pins 1 and 2
must be connected in parallel)
Positive output (pins 3 and 4
must be connected in parallel)
CAN high-level signal
CAN low-level signal
CAN high-level signal
CAN low-level signal
Signal ground
Insertion and removal control
Emergency shutdown+
Emergency shutdown–
2 Overview
19