Flush Mounting Type S - Furuno GP-150 Installation Manual

Flush mounting type S

An optional flush mount kit type S is required. (Name: Flush Mount Kit S, Type: OP20-24,
Code No.: 004-393-000)
Name
Wing bolt
Hex. bolt
Wing nut
Spring washer
Flush mount metal
1. Prepare a cutout in the mounting location whose dimensions are 242 (W) X 152 (H) mm.
2. Insert the unit to the cutout.
3. Attach two flush mount metals to the unit with two hex bolts (M6X12) and two spring
washers.
4. Screw four wing bolts to wing nut.
5. Fasten the unit with wing bolts assembled at step 4, and then tighten nuts.
Type
M4X30 YBSC2
M6X12 SUS304 000-162-897-10
M4 YBCS2
M6 SUS304 000-158-855-10
20-013-1111
5
Code No.
000-804-799
000-863-306
100-234-230
3. DISPLAY UNIT
Qty
4
2
4
2
2