Ipod®/D. Player Operations - JVC KD-G828 Instructions Manual

3
Assign a title.
1 Press number button 4 (
repeatedly to select a character set.
2 Turn the control dial to select a
character.
• For available characters, see page 26.
4/¢
3 Use
(or previous) character position.
4 Repeat steps 1 to 3 until you finish
entering the title.
4
Store the title.
To erase the entire title
In step 3 above...
)
to move to the next
iPod®/D. player operations
This unit is ready for operating an Apple iPod
or a JVC D. player from the control panel.
Before operating your iPod or D. player:
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
• Interface adapter for iPod®—KS-PD100 for
controlling an iPod.
• D. player interface adapter—KS-PD500 for
controlling a D. player.
• For connection, see Installation/Connection
Manual (separate volume).
• For details, refer also to the manual supplied
with the interface adapter.
Caution:
Make sure to turn off this unit or turn off the
vehicle's ignition switch before connecting
or disconnecting the iPod or D. player.
Preparations:
Make sure "Changer" is selected for the external
input setting (see page 18).
~
Ÿ
Playback starts automatically from where
it has been paused (for iPod) or stopped
(for D. player) previously.
Continued on next page...
21