Buzzer - Fujitsu fi-4990C Operator's Manual

Image scanner

Hide thumbs Also See for fi-4990C:

Table of Contents

Buzzer

The scanner has a buzzer to indicate that an error has occurred or an operator panel button is

pressed. The buzzer function can be set on or off by following the procedure "Buzzer" in Chapter 6

SETUP, BROWSE, AND TEST MODES.

Sound condition

Error occurred

Button pressed

1-8

Function

Sounds continuously. The buzzer turns off when any button is pressed or the

power is turned off. Even when a button is pressed, the scanner continues

to display the error.

Sounds briefly. This sound cannot be disabled by the buzzer setup.

Table of Contents