Replacing The Battery; Operation Instructions - jotron Tron 40VDR Capsule User Manual

Hide thumbs Also See for Tron 40VDR Capsule:
Table of Contents

Advertisement

If the hole is not visible or it is not easy to push the cotter
pin through, do not force the pin or press the cover,
remove the cover, and try again.
7.2

Replacing the battery

The Tron 40VDR battery must be changed at a Jotron shore based
maintenance (SBM) authorized workshop to be GMDSS compliant.
If your Tron 40VDR is not under any international or national regulations,
the battery can be change by authorized Jotron representatives/partners/
dealers.
8

Operation instructions

Tron 40VDR is designed to be operated either manually or automatically.
The EPIRB will automatically start to transmit when immersed into water.
The Tron 40VDR has an internal safety switch which prevents inadvertent
activation through moisture and water spray when located in the bracket.
The EPIRB battery lasts for 168 hours from activation.
This EPIRB should only be used in an emergency. Should an EPIRB be used
for any other reason, the user will be held responsible.
Doc. No.: 87634 Rev. G
jotron.com
Page 23 of 48

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb-40Fbh-40

Table of Contents