Table of Contents
Advertisement
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE
REFER TO THE OPERATION MANUAL.
General
Power source:
AC 230 - 240 V, 50 Hz
D C 1 2 V [ "D " size IUM/SUM-l,R20 or
HP-2 ) battery x 8)
Output power:
(Left + Right + Extra bass)
PMPO; 60 W (15 W + 15 W + 30 W)
(AC operation)
MPO; 27 W (7.5 W + 7.5 W + 12 W)
(AC operation)
(DC operation, 10% T.H.D.)
Speakers:
8 cm (3-l /8" ) free-edge super woofer
x l
12 cm (4-3/4" ) free-edge woofer x 2
Tweeter x 2
Mixing mic; 600 ohms
Input impedance:
CD/Line in; 50 k ohms
Headphones; 16-50 ohms
Load impedance:
(recommended 32 ohms)
Width; 560 mm 122-l/16" )
Dimensions:
Height; 210 mm (8-5/16" )
Depth; 187 mm (7-3/8" )
Weight:
5 kg 11 1 Ibs.) without batteries
1. Turn tt
stretch its cord over the parts in the numerical order.
2. Then turn the tuning control shaft fully in the direction @
shown in Fig. 2-2 and fix its pointer as shown in Fig. 2-1.
Radio
Frequency range:
T a p e r e c o r d e r
Tape:
Frequency response: 60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
Wow and flutter:
Specifications for this model are subject to change without
prior notice.
.
Figure 2-2
FM; 87.6 - 108 MHz
AM; 526.5 - I,6065 kHz
Compact cassette tape
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0 . 1 5 oh (WRMS)
Figure 2-1
Turns
Advertisement
Table of Contents
