Removing The Smart Core Block - Sony KDL-42W805A Repair Manual

REMOVING THE SMART CORE BLOCK

1. Remove 1 screw, then release the Harness from Smart Core Block
Cover hooks.
2. Firmly lift up the Smart Core Block Cover left side to remove.
NOTE: To avoid damaging the Smart Core Block Cover, removal MUST
start from the left side as
3. Disconnect 2 connectors from the Smart Core Block.
4. Grasp Smart Core Block as shown, then twist it downwards to release.
KDL-42W805A/47W805A
shown.
SECTION 3 - REPAIR INFORMATION
5. Release connector from Lid, SC hook to disconnect.
6. Unclamp 2 side clips from the Lid, SC and lift as shown to detach.
7. Carefully, using a flat edge object (ex. steel ruler), release the clip
located on the right side corner, and pull as shown to detach the Panel
Ornament.
8. Remove HIR, Wi-Fi PWB Board and BT Module.
HIR, BOARD
9. Release 2 hooks from HSC Board and detach.
HSC
BOARD
LID, SC
WIFI PWB
BT, MODULE
18