REMOVING THE SMART CORE BLOCK
1. Disconnect 2 connectors from Smart Core Block.
2. Locate and remove 2 screws.
3. Grasp Smart Core Block and carefully pull upwards, then disconnect
Harness to detach from Panel.
4. Pull Bottom Cover on the direction shown to detach from Top Cover.
KDL-50W700B/55W700B
Smart Core Block
Smart Core Block
Top Cover
Top Cover
Bottom Cover
Bottom Cover
SECTION 3 - REPAIR INFORMATION
5. Release 6 hooks on the sequence shown by pulling apart the Bottom
Cover to access the HSC2 Board.
6
6
4
4
5
5
1
1
6. Unclamp 2 side clips from the HSC2 Board and lift as shown to detach.
7. Release 4 hooks to remove the back cover from the front cover.
Locate and unclamp the side clips to detach the BT Module and
Wireless LAN Card.
3
3
2
2
HSC2 Board
HSC2 Board
Wireless
Wireless
LAN Card
LAN Card
BT Module
BT Module
18