Removing The Smart Core Block - Sony KDL-42W650A Repair Manual

REMOVING THE SMART CORE BLOCK

1. Remove 1 screw, then release the Harness attached to LCD Panel.
2. Grasp Smart Core Block as shown, then twist it downwards to release
clips.
3. Apply pressure on both sides of Cover, SC and pull it apart to detach.
4. Disconnect connectors and release cable from Lid, SC hook.
KDL-42W650A
SECTION 3 - REPAIR INFORMATION
5. Unclamp 2 side clips from the Lid, SC and lift as shown to detach.
6. Carefully, using a flat edge object (ex. steel ruler), release the clip
located on the right side corner, and pull as shown to detach the Panel
Ornament.
7. Detach the HIR Board and WLAN Module.
HIR BOARD
8. Release hooks from HSC-WIFI Board to detach.
HSC-WIFI
BOARD
LID, SC
WLAN
MODULE
17