SECTION 3 - REPAIR INFORMATION
REPAIRING THE TV
If the latest Software does not correct the issue, complete the following:
1. Verify the television has the symptom the customer indicated.
2. Replace part causing the error.
3. Install the latest version of Software (Required for ALL repairs).
4. Perform the required service adjustments and checks.
5. Verify the repair resolved the issue.
REMOVING THE TABLE-TOP STAND
1. Remove 4 screws from Table-Top Stand and pull down as shown to
detach from Rear Cover.
KDL-42W805A/47W805A
REMOVING THE REAR COVER
1. Locate and remove all screws from Rear Cover.
2. Remove 1 screw from AC Cover and disconnect the AC Power Cord.
HOLD
3. Grasp the AC Cover opening and the bottom right side of the Rear
Cover, then carefully pull upwards to detach.
13