Ariston 3319121 Assembly And Operation Instructions Manual page 14

associating the wireless device
• Check that the connection between the
receiver and the heat generator has
been completed successfully (green
led on) as indicated in the receiver's in-
struction booklet .
• Check that the wireless multizone kit is
powered up (green led on). (Fig. 8)
• Hold the key on the multizone radio
module down for 3 seconds; the radio
module's red led (Fig. 7) and the leds
on the wireless multizone kit (Fig. 8) will
start fl ashing.
• Hold the key on the receiver down for
5 seconds; the red led will fl ash 3 times
in 1 second and then go out.
The association procedure now starts.
• If the association procedure is success-
ful, the receiver's led will go out and the
wireless multizone kit leds for the out-
puts connected to the accessories will
turn on.
DIAGNOSTICS
Multizone radio module
LED STATUS
OFF
GREEN
ON
OFF
RED
Flashing
ON
Wireless multizone kit
LED STATUS
OFF
RED
Slow fl ashing
ON
14 - GB
Fig. 7
RED LED
Fig. 8
DIAGNOSTICS
Controller not powered up or system reset
Controller powered up
Device associated
Association procedure running
Device not associated
DIAGNOSTICS
Output inactive
Device association in progress
Output active
BUTTON
GREEN LED
LED
1 2