Eco Tub Clean - Samsung WA19T7G6DW Series User Manual

Maintenance

ECO TUB CLEAN

Certain usage and environmental conditions may result in some residue build-up or odor
in the washer tub. To prevent this build-up of residue or odor causing bacteria and keep
your washer tub fresh and clean, perform the ECO TUB CLEAN cycle at least once a month
or every 20 cycles. Perform the recommended procedure below when using the ECO TUB
CLEAN cycle.
1. Remove all items from the washer tub and ensure the tub is empty. Laundry left in the
tub during the ECO TUB CLEAN cycle may be damaged.
2. Press POWER.
3. Turn the Cycle Selector to ECO TUB CLEAN.
4. Press START/PAUSE. ECO TUB CLEAN begins.
NOTE
• The water temperature for ECO TUB CLEAN is defaulted to Hot. This temperature cannot
be changed.
• In the case where residue is present in the washer tub, add 1 cup (8 fl.oz, 240 ml) of
liquid chlorine bleach to the bleach compartment before you start the ECO TUB CLEAN
cycle. Do not use or mix any other detergent or chemicals during the ECO TUB CLEAN
cycle.
• If necessary, run a RINSE+SPIN Cycle after the ECO TUB CLEAN cycle has completed to
help remove any remaining residue.
CAUTION
• Check the washer tub before using the ECO TUB CLEAN cycle. Remove any remaining
water in the tub by running a Spin Only cycle prior to starting the ECO TUB CLEAN
cycle.
• If there is chlorine bleach left in the washer tub for an extended period of time, rust
can occur.
ECO TUB CLEAN reminder
• After 20 washing cycles, the ECO TUB CLEAN LED reminder icon and the ECO TUB
CLEAN cycle LED will blink on the control panel for an hour and then turn off
automatically.
• The reminder will appear on the control panel for 5 additional consecutive cycles
before turning off. The next reminder will not appear until another 20 cycles have been
completed.
32 English
WA750L_DC68-04048D-00_EN.indd 32 2020-12-09 5:04:47