Panasonic Omnivision PVQ-2511 Service Manual page 60

Hide thumbs Also See for Omnivision PVQ-2511:
Table of Contents

Advertisement

4. Press VOL UP/DOWN key on the remote control so that the
shaded area moves to the control function.
5. Press CH UP/DOWN key on the remote control to select a control
function for the next adjustment if necessary.
7.3.3.2.2. How to release from EVR Adjustment Mode:
Press and hold STOP, PLAY, and VOL DOWN buttons on the unit together over 5 seconds again
or press the POWER button OFF. The adjusted value will be written to Memory IC (IC6004).
7.3.3.3. HOW TO ENTER EVR PG SHIFTER ADJUSTMENT MODE
1. Enter EVR adjustment mode.
2. Insert the VHS Alignment Tape and playback in SP mode.
The adjustment overlay will appear.
7.3.3.3.1. How to adjust:
Press CH UP/DOWN key on the remote control to adjust the value.
7.3.3.3.2. How to release from EVR PG Shifter Adjustment Mode:
Press STOP button or press the POWER button OFF.
The adjusted value will be written to Memory IC (IC6004).
7.3.3.4. HOW TO ENTER SERVICE MODE
1. Enter EVR adjustment mode.
Fig. E2-4
Fig. E2-5
Fig. E2-6
Fig. E2-7
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnivision pv-c2541

Table of Contents