Table of Contents
Advertisement
How to read chart shown above:
A:Order of Procedure steps.
When reassembling, perform steps(s) in reverse order.
These numbers are also used as the identification (location) No. of parts in Figures.
B: Part to be removed or installed.
C: Fig. No. showing Procedure or Part Location.
D: Identification of part to be removed, unhooked, unlocked, released, unplugged or unsoldered.
6(S-1) = 6 Screws (S-1), 6(L-1) = 6 Locking Tabs (L-1),
(P-1) = Spring (P-1)
E: Refer to
"Notes in
chart."
Fig. D2
24
Advertisement
Table of Contents
