Table of Contents
Advertisement
1. Installation of VCR Unit
CAUTION:
Opener Lever may be damaged when VCR Unit is installed, with
Cassette Door-Lid and Opener Lever of Cassette Up Ass'y set
incorrectly.
A. When installing the VCR Unit, swing the Cassette Door-Lid all
the way open until the Cassette Door tab clears the Opener
Lever.
B. Make sure that all guide tabs are aligned properly.
Then, press the VCR Unit straight in.
2. Removal of CRT Unit
Place the Unit face down on a soft cloth before removing the CRT
Unit.
3. Installation of VCR Chassis Unit
When installing 2 Screws (S-6), slide the Holder Unit of the
Cassette Up Ass'y (Refer to
UNLOADING OF
screws. Then, slide it back to the EJECT Position.
Make sure that Mechanism and Cassette Up Ass'y are in the EJECT
Position. (Refer to "EJECT Position Confirmation" in
DISASSEMBLY/ASSEMBLY PROCEDURES.)
4. Removal of TV/VCR Main C.B.A.
Fig. D6
"METHOD FOR LOADING/
MECHANISM" in SERVICE NOTES) to tighten
27
Advertisement
Table of Contents
