Using Your Led Projector For The First Time - Asus ZenBeam Latte User Manual

NOTE: The following screenshots are for reference only and may be
updated without prior notice. Screenshots may also vary depending on
the LED projector model.
Using your LED projector for the first
time
Refer to the following steps when using your LED projector for the first
time.
NOTE: Ensure that your LED projector is connected to the power adapter
before turning it on for the first time. We strongly recommend that you use
a grounded wall socket while using your LED projector on power adapter
mode.
1. Set up your LED projector then press the power button.
Press the Left or Right buttons on your LED projector or on your
2.
remote control to browse through the available language options.
You may also press the Cursor ( ) icon on the remote control to
enable the cursor and use the directional buttons to move to the
language you wish to use.
After you have chosen your preferred language, press the Menu
3.
button on your LED projector or on your remote control to set this
language for use on your LED projector.
4. Next select an available network for the LED projector to connect
to. You may skip this step for the time being and choose to set up a
network connection at a later time.
5. (optional) If you selected an available network to connect to, enter
the password for the network connection if required.
6. You may now start using your LED projector to display files from your
input device, watch media using the Aptiode TV app, as a Bluetooth
speaker, or to mirror the screen of your phone.
36 LED projector User Manual