Using Your Led Projector For The First Time - Asus F1 Series E-Manual

NOTE: The following screenshots are for reference only and may be
updated without prior notice. Screenshots may also vary depending
on the LED projector model.
Using your LED projector for the first
time
Refer to the following steps when using your LED projector for the
first time.
NOTE: Ensure that your LED projector is connected to the power
adapter before turning it on for the first time. We strongly recommend
that you use a grounded wall socket while using your LED projector
on power adapter mode.
1. Set up your LED projector then press the power button.
2. Move the joystick left or right on your LED projector to browse
through the available language options.
3. After you have chosen your preferred language, press the center
of the joystick to set this language for use on your LED projector.
4. You may now start using your LED projector to display files
from your input device. The NO SIGNAL screen may appear if
no input device is connected or cannot be detected by the LED
projector.
38
LED projector E-Manual