Table of Contents
Advertisement
Ventilating openings
INSTALLATION
CONNECTION OF THE OVEN
N
L
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven's centre temperature
G560
is over 750C, the cooling fan will continue working for 15 minutes. Or when the oven's centre
temperature becomes lower than 750C, the cooling fan will stop in advance.
F570
min.
C575
B595
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
PA G E 8
12
P
I
02 9604 1226
80
250
100
E600
H560
Ventilating
D606
openings
Ventilating openings
E
I
sales@danielaappliances.com.au
W
|
danielaappliances.com.au
SHELF PLACEMENT WARNING:
INSTALLATION
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
SHELF PLACEMENT WARNING
The shelves should be used with the right direction, it will ensure that during careful removal of the
•
To ensure the oven shelves operate safely, correct placement of the shelves between
SHELF PLACEMENT WARNING:
shelf or tray, hot food items should not slide out.
the side rail is imperative. Shelves and the pan only can be used between the first and
fifth layers.
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
•
The shelves should be used with the right direction, it will ensure that during careful
The shelves should be used with the right direction, it will ensure that during careful removal of the
removal of the shelf or tray, hot food items should not slide out.
shelf or tray, hot food items should not slide out.
OR
OR
BULB REPLACEMENT
BULB REPLACEMENT
For replacement, process as follows:
For replacement, process as follows:
BULB REPLACEMENT
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
For replacement, process as follows:
the bulb with a new one of the same type.
the bulb with a new one of the same type.
1.
Disconnect power from the mains outlet or switch
3> Screw the glass lamp cover back in place.
3> Screw the glass lamp cover back in place.
off the circuit breaker of the unit's mains outlet.
NOTE: Only use 25-40W/220V-240V , T300°C halogen lamps.
NOTE: Only use 25-40W/220V-240V , T300°C halogen lamps.
2.
Unscrew the glass lamp cover by turning it
counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3.
Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
SECURING THE OVEN TO THE CABINET
3. Secure the oven to the kitchen cabinet with two
1. Fit oven into the cabinet recess.
distance holders "A" which fit the holes in the oven
frame and fit the two screws "B".
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders "A" which fit the holes in the oven
frame and fit the two screws "B".
P
I
02 9604 1226
E
I
sales@danielaappliances.com.au
W
|
danielaappliances.com.au
11
PA G E 9
Advertisement
Table of Contents
