FIESSLER
E L E K T R O N I K
Multi-sided safeguarding via deflecting mirrors
Mirrors can be used to deflect a protective field around hazard zones, permitting creation of multi-sided barricades. The law of
light reflection, i.e. angle of incidence = angle of reflection, applies here. To achieve a deflection of 90°, the mirror must
therefore be positioned at an angle of 45°. The deflecting mirrors have swivel bearings for this purpose.
Mirror
Transmitter
Barrier grille or wall
Reflection losses: Each time it is deflected by a mirror, the transmitted signal is attenuated. When using such mirrors, you
should therefore account for the signal's maximum range and the number of required deflections. Make sure to mount
transmitter, receiver and mirrors perpendicularly and check their alignment with a spirit level.
Fiessler Elektronik GmbH & Co. KG
Kastellstr. 9
D 73734 Esslingen
Assembly
2
Mirror
Hazard zone
Receiver
/ optional
Mirror
Transmitter
BA - TLCT / ICT_1129
Phone: +49 / 711 / 91 96 97-0 Internet: http://www.fiessler.de
21
Fax:
Table of Contents
Mounting and adjustment
2.4
Receiver
Hazard zone
Barrier grille or wall
+49 / 711 / 91 96 97-50 E-mail: info@fiessler.de