Using Your Retro Milkshake Maker - Dash DMM100 Quick Start Manual

using your retro milkshake maker

BEFORE USING YOUR MILKSHAKE MAKER
Remove all packaging materials.
•
Check that the Milkshake Maker has no visible damage and that no parts are
•
missing.
Before using the appliance for the first time or before using it after prolonged
•
storage, wash and dry the appliance along with any accompanying accessories.
See "Cleaning & Maintenance" for instructions.
Please do not remove the Mixing Wand.
•
10 ∙ using your retro milkshake maker
using your retro milkshake maker
1
Place the appliance on a stable, flat, heat-resistant
surface. Plug the Milkshake Maker into a wall socket.
2
Prepare your ingredients and add them to the
Milkshake Cup.
3
Slide the lip of the Milkshake Cup into the Cup
Support and rest the bottom of the Milkshake Cup
on the Cup Rest.
4
Once the Milkshake Cup is securely and
properly placed onto the Cup Rest, turn the Milk-
shake Maker on to the "Pulse"setting by pressing the
On/Off/Pulse Switch up into the "II" position. Hold
this button down for approximately 10-15 seconds.
Then run the Milkshake Maker on the "I" setting for
approximately 30-45 seconds. Do not run the
Milkshake Maker for more than 3 minutes at a time.
using your retro milkshake maker ∙ 11