Silvercrest SND 3600 D3 Short Manual page 17

Colour and brightness settings
♦ Adjust the colours and brightness as required by clicking on the
"Color/Brightness adjustment" button (K) . A settings window
appears .
♦ Move the "Brightness" slider to set the brightness between
−64 and 64 .
♦ Move the three "Color Balance" sliders to set the RGB values
between −6 and 6 .
♦ To reset to the default values, click on the "Default" button .
♦ To accept the new values and close the settings window, click on
the "Exit" button .
SND 3600 D3
GB │ IE │ 13 ■