Connecting To A Computer; Installing The Software - Silvercrest SND 3600 D3 Short Manual

Connecting to a computer

NOTE
► Use only the original accessory parts recommended by the
manufacturer for this appliance .
System requirements
Operating system: Windows Vista/7/8/10, Mac 10 .10‒11 .2 .3
Slot: USB connection (USB 2 .0)
♦ Connect the micro-USB plug on the USB cable
USB port
♦ Connect the USB plug on the USB cable
PC . The computer recognises the new hardware and starts in-
stalling the drivers automatically . This process can take a around
a minute . The PWR LED
properly connected .

Installing the software

ATTENTION
► Important files may be changed or overwritten during the
installation of the software! Before installing the installing
the software, make a backup of your original files to ensure
that you will be able to access them later if problems occur
during installation .
Installation on Windows
NOTE
► If your computer does not have a CD drive, visit the following
website to download the software:
www .kompernass .com/375646_2104
SND 3600 D3
on the scanner .
3
1
8
lights up as soon as the scanner is
to the micro-
8
to a powered-on
GB │ IE │ 7 ■