Operation; Cleaning And Maintenance - Siemens SIMATIC RTLS4083T Operating Instructions Manual

Installation & Operation

3.2 Operation

Fires and burns
Improper handling of the battery can lead to fire and skin injuries.
The housing of the device must not be squashed, punctured or exposed to other mechanical
influences.
Never expose the device to fire, temperatures above 40 °C or direct sunlight for an extended
period of time.
3.2 Operation
Note
Operate the device only with the accessories provided for this purpose, which are listed in the
section "Order data RTLS4083T (Page 9)".
The device is delivered in the switched-off state. To commission the device, it has to be
inserted into the associated charging station once so that the green LED on the device lights
up.
The device is operated with the F1 function key on the front panel. The function of the key
can be programmed via the programming interface.
If the voltage is too low, the device switches off automatically. The device sends a "Low
power" message to the Locating Manager. The limit above which the device sends this
message is configurable. In this case, the device must be fully recharged within 3 months to
avoid deep self-discharge and damage to the battery.
3.3

Cleaning and maintenance

The housing must not be opened.
The device may only be repaired by an authorized maintenance company or opened for other
types of work.
Improper opening or repairing of the device may result in risks for the user. Opening the
device without permission renders the warranty of the Siemens AG null and void.
Do not clean the enclosure with liquids or abrasive, caustic or flammable cleaning products.
Note
Due to the integrated battery, the device is a hazardous good. Observe the applicable
regulations when shipping.
14
CAUTION
Operating Instructions, 02/2022, C79000-G8976-C527-06
SIMATIC RTLS4083T