Power Base Assembly Instructions - Reverie 3E Power Base Owner's Manual And Reference Manual

IMPORTANT UNPACKING INSTRUCTIONS
To avoid damage to the power base, always
open the carton while the power base is
laying in the FLAT position on the floor.
OPEN FLAT
STEP 1
Carefully lift the power base unit out of the
shipping carton, keeping the unit top side
down. For safety reasons, this should be
performed by 2 people.
Assembling power base legs: Open the
accessories box, take out the 4 legs,
and thread them in a clockwise direction into
the threaded holes in the frame.
Remove the extend the power cord from the
frame.
Remove the plastic packaging from the power
base.
CUSTOMER SERVICE: 800-973-8374
CUSTOMERSERVICE@REVERIE.COM
9
Frame Assembly Instructions
STEP 2
NOTE: Tighten the legs securely to the frame.
Leave no space between the leg and frame.
STEP 3
WARNING:
POWER CORDS MUST NOT INTERFERE
WITH ANY POWER BASE MECHANISMS.
STEP 4