Reverie 3E Power Base Owner's Manual And Reference Manual page 11

NOTE: If the power base is to be set
up without a headboard, simply install a
mattress on the frame. If a headboard is
to be installed, please follow headboard
installation instruction.
ATTENTION: Failure to follow the proper
installation instructions may result in
damage to your power base.
NOTE: It is important to position the bottom
of the headboard cross member a maximum
distance of 3 inches (76.2 mm) between the
headboard and the top of the mattress. Do
not exceed 3 inches (76.2 mm).
STEP 10
Place your mattress on top of your power base.
Typical Reverie 3E™ Power Base installation
is now complete. If the base is equipped with
a programmable setting or options, refer to the
Remote Control Guide for more information.
CUSTOMER SERVICE: 800-973-8374
CUSTOMERSERVICE@REVERIE.COM
11
Frame Assembly Instructions