Cleaning Guide; Cleaning The Condenser - FWE COLD-TEMP URS-10 Operating Instructions Manual

FWE
REFRIGERATED "COLD-TEMP" SERIES

CLEANING GUIDE

CLEANING
Keep your cabinet clean by simply wiping the interior and exterior, as needed,
with a damp cloth or sponge and a mild soapy solution.
YES!
THESE
USE
PRODUCTS
NEVER USE ABRASIVES, ACIDS, OR STRONG CLEANERS.
Do not flood or allow electrical parts to become wet. The interior tray slide
assemblies are removable for easy cleaning.
A stainless steel cleaner/polish is recommended for the exterior to maintain a
"like-new" appearance.
DO NOT USE WAX OR STRONG CLEANERS ON DOOR GASKETS OR
TRIM.
VINYL

CLEANING THE CONDENSER:

The most important thing you can do to insure a long, reliable service life
for your FWE Refrigerator or Freezer is to regularly clean the condenser
(compressor) coil. The condensing unit requires regularly scheduled cleaning
to keep the finned condenser clean of lint and dust accumulation.
Keeping the condenser clean allows the cabinet to operate efficiently, use less
energy, and achieve top performance values.
To clean the condenser, first disconnect electrical power to the cabinet. Remove
condenser cover and vented panel in front of condenser coil. Vacuum any
dirt, lint, or dust from the finned condenser coil, compressor and other cooling
system parts. If significant dirt is clogging the condenser fins, use brush or
compressed air to blow this clear.
NOTE: Care should be taken not to bend any of the condenser fins, as
this will reduce performance and compressor life. Replace vented panel,
condenser cover and screw which hold them in place.
8
FWE Operating Instructions | Refrigerated "Cold-Temp" Series
DO NOT
THESE
USE
PRODUCTS