Related Manuals for FWE MOISTURE-TEMP MTU Series
Summary of Contents for FWE MOISTURE-TEMP MTU Series
- Page 1 OPERATING INSTRUCTIONS MOISTURE-TEMP CABINETS Heat Cycling Light Thermometer Air Temperature “HEAT” Control Dial Air Moisture Control Main Power Switch...
- Page 2 MOISTURE-TEMP CABINETS Serial Tag Parts List Control Panel Heat System Tunnel Moisture Drip Trough 12" x 20" Water Pan With and Heat Basin Removable Drain Plug FWE MOISTURE-TEMP HEAT SYSTEM...
- Page 3 ELECTRICAL REQUIREMENTS AND GROUNDING The amperage of your cabinet is stamped on the name plate serial tag attached to the unit. FWE models are equipped with a three prong grounding cord plug for your protection against possible shock hazards. Be sure to plug only into a properly grounded three prong wall receptacle.
-
Page 4: Control Panel
Thermometer Press tactile key to alternate between Air Temperature ACTUAL temp “HEAT” Control Dial (with ACTUAL LED illuminated) and SETPOINT temperature Air Moisture Control Dial “P” to Indicates Proof Position Proof Cycling Light Main Power Switch FWE MOISTURE-TEMP HEAT SYSTEM... - Page 5 FWE MOISTURE-TEMP CABINETS HEAT SYSTEM AND CABINET COMPONENTS ADDING WATER TO 12" x 20" PAN Add HOT water to 12" x 20" pan with heat tunnel in position. Water Pan is positioned into heat basin. Heat HOT WATER Tunnel 12" x 20"...
- Page 6 5) LOAD THE CABINET with your product as quickly as possible. To maintain the best conditions, the door should be tightly closed when not loading the cabinet, and remain closed until serving. FWE MOISTURE-TEMP HEAT SYSTEM...
-
Page 7: Troubleshooting Chart
* * NOTE: CALIBRATION IS EXCLUDED FROM FWE WARRANTY. Thermostats on all units are calibrated at the factory prior to shipping. Due to conditions in transit, beyond our control, occasionally units will need to be re-calibrated prior to use. - Page 8 HEAT BASIN. ADD WATER INTO 12" x 20" PAN ONLY. HEAT BASIN shown WITHOUT 12" x 20" pan. WARNING: THE WATER PAN, AIR TUNNEL AND HEATING ELEMENT(S) ARE HOT WHEN IN USE AND COULD CAUSE INJURY. FWE MOISTURE-TEMP HEAT SYSTEM...
- Page 9 FWE MOISTURE-TEMP CABINETS EASY TO OPERATE The ON-OFF rocker switch activates power to the cabinet. Moisture-Temp cabinets are equipped with two (2) heating elements and two (2) separate controls which regulate these elements. This allows you to adjust the temperature and humidity separately.
-
Page 10: Service Record
___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ CAUTION: HOLDING FOOD AT TEMPERATURES OF LESS THAN 140°F MAY BE DANGEROUS. TEMPERATURES UNDER 140°F PROMOTE THE GROWTH OF HARMFUL BACTERIA AND TOXINS IN SOME FOODS. FWE MOISTURE-TEMP HEAT SYSTEM... -
Page 11: Limited Two-Year Warranty
FWE MOISTURE-TEMP CABINETS LIMITED TWO YEAR WARRANTY FWE / Food Warming Equipment Company, Inc. (Seller) warrants to the original purchaser, subject to the exceptions and conditions below, that FWE manufactured equipment shall be free from defects in material or factory workmanship, under ordinary use for the purpose for which it is designed. - Page 12 FWE Parts Department: www.FWEparts.com Order Hotline: 800-222-4393 F O O D W A R M I N G E Q U I P M E N T C O M PA N Y, I N C . 800-222-4393 P. O. Box 1001...
Need help?
Do you have a question about the MOISTURE-TEMP MTU Series and is the answer not in the manual?
Questions and answers