Surface Light Replacement; Charcoal Filter Replacement - GASLAND chef OTR1603B Installation Instructions Manual

Over the range microwave oven
Table of Contents

Advertisement

15

Surface light replacement

CAUTION
To avoid risk of personal injury or property damage, wear gloves when replacing
the light bulbs.
1. Unplug the microwave oven or turn off power at the main circuit breaker.
2. Remove the bulb cover mounting screws at both light positions under the
microwave.
3. Replace bulb with 30 watt appliance bulb.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply or turn the power back on at
the main circuit breaker.
Cleaning And Care
Disconnect the power cord before cleaning or leave the door open to deactivate
the oven during cleaning.

Charcoal filter replacement

Charcoal filter installed in your microwave oven, is used for nonvented, recirculat-
ed installation. The filter should be changed every 6 to 12 months depending on
use.
1. Disconnect power to the microwave oven at the circuit breaker panel or by
unplugging.
2. Remove the vent grill mounting screws.
3. Pull the vent grill away from the unit.
1 (844) 538-7890
support@gaslandchef.com
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418

Advertisement

Table of Contents
loading

This manual is also suitable for:

Otr1603s

Table of Contents