Table of Contents
Advertisement
POWER CONNECTIONS
Connect the ground terminal to the closest point on the chassis of the vehicle. Use
8-gauge (or heavier) wire to connect the ground cable.
Connect the remote terminal to the remote output of head unit using 16-gauge
(or heavier) wire.
Connect an empty fuse holder within 16" (40 cm) of the car battery, and run 8-gauge (or
heavier) cable from this fuse to the amplifier location. Then connect the fuse holder to the
"BATT+" (+12V) connection on the subwoofer rear panel.
Fig.4
Fig.5
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZR10P - ACTIVE SUBWOOFER
ZR10P Owners Manual
Advertisement
Table of Contents
