Remote Level Control Connection - Phoenix Gold ZR Series Quick Start Manual

ZR10P Owners Manual
HIGH LEVEL INPUT WIRING
The high level input(s) should only be used when your receiver lacks RCA outputs. If the
RCA outputs are not present, connect the speaker outputs from the receiver to the high
level input connector of the amplifier. Be sure to observe polarity to avoid audio phase
problems.
NOTE: Do not connect BOTH the high level and low level inputs from your receiver to
your amplifier at the same time!
Fig.2

REMOTE LEVEL CONTROL CONNECTION

Fig.3
ZR10P - ACTIVE SUBWOOFER
Install the remote control securely under
the dash or in a similar location where
using it wil not distract the driver.
© 2021 Phoenix Gold • www.phoenixgold-eu.com