HoMedics TOTALCLEAN AP-T45WT-EU Instruction Manual page 5

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
OPERATING INSTRUCTIONS
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic
bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a standard AC outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power
• This air purifier has 3 fan speed settings: low, medium, high and auto.
The higher the fan speed setting, the faster the air will be purified. To
select or change fan speed, press the fan speed
desired setting is reached.
UV-C TECHNOLOGY WITH ON/OFF
The optional UV-C technology kills germs, viruses, and bacteria by
penetrating its DNA, resulting in the microorganism's death or the inability
to reproduce. Press the UV-C button to turn the UV-C technology on.
The blue LED will glow. Press the UV-C button again to turn the UV-C
technology off.
AUTO MODE/PARTICLE SENSOR
To select the auto mode/particle sensor function, press the
particle sensor button. The auto mode/particle sensor button will illumi-
nate and the fan button LED will turn off. The auto mode/particle sensor
automatically adjusts the fan speed based on indoor air quality. The room
air quality is displayed as green (good), yellow (fair), or red (bad). When
using the auto mode/particle sensor, if the room air quality is green, the
air purifier operates on low speed; when yellow, on medium speed; when
red, on high speed. Once the room air quality improves, the fan speed will
reduce based on the corresponding room air quality level. To exit the auto
mode/particle sensor function, press the
particle sensor button LED will turn off and the fan button will illuminate.
IONISER SETTING WITH ON/OFF
Ion particles have a positive or negative charge that attach to airborne
particles, making them easier to be captured by the filtration system. Press
the ioniser ION button to turn the ioniser on. The blue light will glow to
indicate the ioniser is in use. Press the ioniser ION button again to turn
the ioniser off.
NOTE: Dust particles may accumulate on surfaces around the air purifier
when the ioniser is in use. These dust particles can be vacuumed or wiped
away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ioniser is used.
This is normal.
NOTE: The ioniser produces less ozone than the UL-established limits of
0.05 ppm. Ozone may be harmful around birds and small pets. To prevent
ozone buildup, use the ioniser feature in a well-ventilated area.
NIGHT INDICATOR
The night indicator has 3 options. Press once to turn the blue night
indicator on. Press again to turn the blue night indicator ring and the
display lights off. Press a third time to turn the display lights on.
TIMER
Press the timer
button until the desired timer setting is lit on the
display. The timer
button will cycle through the following settings: 2
hours, 4 hours, 8 hours, 12 hours, and off. To cancel the timer at any time,
press the timer
button until all timer LEDs are off. The air purifier will
run continuously when the timer function is off.
CHILD LOCK
Press and hold the night indicator & timer buttons for 3 seconds to set
the child lock. Press and hold the night indicator and timer buttons for 3
seconds to disable the child lock.
button.
button until the
auto mode/
fan button. The auto mode/
GB
OIL TRAY
Use essential oil (not included) to deliver scent into the air.
NOTE: For use with the included HoMedics essential oil pads only. Do not
add essential oils anywhere else in the unit as it may cause damage.
NOTE: Do not leave a filled essential oil pad in the air purifier if it will be
out of use for a long period of time.
ARE ESSENTIAL OILS SAFE TO USE AROUND PETS?
We should always exercise caution when using essential oils around our
pets. Keep all essential oil and aromatherapy products (like diffusers)
out of reach of pets. Keep open bottles away from pets to avoid internal
consumption. We do not recommend the topical use of essential oils on
pets, as they have a strong sense of smell and cannot get rid of the oil
if they don't like it or it is disturbing them. When diffusing essential oils
around pets, always diffuse in a well-ventilated area and leave an option
for them to remove themselves from the space, such as leaving a door
open. Every animal is different, so carefully observe how each animal
responds when introducing an essential oil for the first time. If irritation
occurs, discontinue the use of the essential oil. We recommend seeking
medical attention if ingestion of essential oil occurs.
ADDING ESSENTIAL OILS
Please note that allergy friendliness is no longer guaranteed if the Essential
Oil Scent Tray function is used, since essential oils may lead to allergic
reactions.
WARNING: Putting oil anywhere but the oil tray will damage the air
purifier.
1. The oil tray is located on the side of the air
purifier above the nightlight ring.
2. Push to open and remove the tray.
3. Place 1 aroma pad (3 included) into the oil tray.
4. Add 5–7 drops of essential oil to the pad.
You may use more or less depending on
personal preference.
WARNING: Only place essential oil on the
pad and NOT directly into the tray.
5. Place the oil tray back in its compartment and
push to close. The scent will start automatically
when the air purifier is turned on.
I
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents